BEHR PREMIUM Granite Grip Decorative Concrete Floor Coating Review (2026)
By The DIYPicks Team · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
- Pool decks
- Patios
- Slip resistance
- Hiding hairline cracks
A tough, water-based acrylic coating whose speckled texture adds real underfoot grip on wet pool decks and patios while filling hairline cracks and resisting hot-tire pickup. The honest trade-off is coverage: at roughly 50 sq ft per gallon in two coats it eats product fast, and like any film coating it only lasts if you fully etch and clean the concrete first.
Pros
- Textured multi-speckle finish is genuinely slip-resistant when wet
- Fills hairline cracks and hides surface imperfections in the concrete
- Water cleanup and resists hot-tire pickup, grease and household stains
Cons
- Very low coverage (~50 sq ft/gal) means you buy and roll a lot of product
- Demands thorough etching/cleaning prep or it will peel from smooth concrete
- Limited stock color range and speckle look is not to everyone's taste
Specifications
| Type | Water-based acrylic, decorative multi-speckle |
|---|---|
| Coverage | ~40-50 sq ft/gal (rough), ~50-60 (smooth) at 2 coats |
| Finish/Texture | Speckled flat texture, grippy underfoot |
| Dry time | Recoat ~6 hrs; foot traffic ~24 hrs |
| Slip resistance | High — textured aggregate finish |
| Cleanup | Soap and water |
| Use | Horizontal exterior/interior concrete (pool decks, patios, garages) |