Gorilla Heavy Duty Construction Adhesive (9 oz) Review (2026)
By The DIYPicks Team · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
- Panels
- Trim
- Multi surface
- Waterproof bonding
A 100% waterproof, polymer-based construction adhesive that grabs in about 30 seconds, so panels, trim, and tile stay put without bracing. Low-odor and paintable with latex, it bonds wood, concrete, drywall, metal, and foam indoors or out, making it a versatile all-surface pick when you want easy cleanup over maximum polyurethane strength.
Pros
- 30-second grab holds vertical panels and trim without bracing
- 100% waterproof polymer bonds indoors and out, even in damp areas
- Low-odor, low-VOC formula is paintable with latex once cured
Cons
- Lower raw structural strength than a polyurethane like PL Premium
- Full cure takes about 24 hours, longer on non-porous surfaces
- White paste can squeeze out and smear on finished surfaces
Specifications
| Type | 100% polymer-based construction adhesive |
|---|---|
| Fixture time | ~30 sec grab |
| Full cure | ~24 hr (up to 7 days for thick beads) |
| Bonds | Wood, drywall, concrete, brick, stone, tile, metal, foam and more |
| Water resistance | 100% waterproof, interior and exterior |
| Temp range | -40F to 200F service |
| Paintable | Yes, with latex within 2 days |