Loctite Threadlocker Blue 242 Review (2026)
By The DIYPicks Team · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
- Locking bolts
- Serviceable fasteners
- Automotive
- Vibration
The default threadlocker for anything you'll service again: valve covers, brackets, bike and equipment bolts. It stops vibration loosening but still breaks free with a wrench, which is exactly why it's the most-reached-for bottle in the shop.
Pros
- Locks bolts against vibration yet comes apart later with ordinary hand tools
- Fills thread gaps and seals against corrosion and leaks between mating threads
- One drop is all it takes; a single small bottle handles dozens of fasteners
Cons
- Anaerobic cure needs metal-to-metal contact; it won't set on plastic threads
- Medium hold can be too weak for high-vibration or safety-critical bolts (use red 271)
- Full strength takes 24 hours, so don't stress the joint immediately
Specifications
| Type | Medium-strength anaerobic threadlocker |
|---|---|
| Set time | Fixture ~1 hr on steel |
| Full cure | 24 hr |
| Bonds | Metal threaded fasteners up to 3/4 in (M20) |
| Strength | Medium; ~115 in-lb breakaway on 3/8-16, removable with hand tools |
| Temp range | Up to 300F (149C) |