RadonSeal Plus Deep-Penetrating Concrete Sealer Review (2026)
By The DIYPicks Team · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
- Basement floors and slabs
- Poured foundation and block walls
- Older or porous concrete
- Radon and moisture vapor reduction
A reactive penetrating sealer that hardens and permanently densifies porous basement slabs and foundation walls while cutting moisture vapor and radon. Choose it over a film waterproofer when you want an invisible, permanent internal seal rather than a paint-on barrier.
Pros
- Reacts deep inside the concrete to seal pores permanently, so there is no film to peel or reapply
- Reduces water vapor, moisture seepage, radon, and efflorescence while hardening the slab
- Zero-VOC, solvent-free, and does not change the appearance of the concrete
Cons
- Works only on concrete and block, not on brick, stone, or already-sealed surfaces
- Does not bridge cracks or resist standing hydrostatic pressure like a film waterproofer does
- Requires multiple wet coats and thorough surface prep to react fully, extending the job
Specifications
| type | Reactive deep-penetrating sealer (water-based) |
|---|---|
| finish | Invisible, no film |
| coverage | Approx 1000 sq ft per 5 gallons (varies by porosity) |
| penetration | Penetrates up to several inches and reacts inside the concrete |
| voc | Zero VOC, solvent-free, non-toxic |
| bestSubstrate | Older/porous concrete and concrete block (Plus formula) |
| coats | 2-3 wet coats |