Rain Bird ET63-100S 1/2 in Emitter Tubing (100 ft) Review (2026)
By The DIYPicks Team · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
- Raised beds
- Rows
- Hedges
The workhorse for raised beds and rows: inline pressure-compensating drip tubing that replaces a leaky soaker hose with even, targeted watering along the whole bed.
Pros
- Emitters are pre-spaced inside the line - lay it out, no punching drippers
- Pressure-compensating design keeps flow even on slopes and long runs
- UV-resistant tubing tucks under mulch and lasts multiple seasons
Cons
- Fixed 18 in emitter spacing won't line up with every plant layout
- Needs 1/2 in compression fittings, an adapter and stakes bought separately
- Overkill and hard to route for just a few scattered containers
Specifications
| Type | 1/2 in pressure-compensating emitter tubing |
|---|---|
| Length | 100 ft coil |
| Emitters | Inline 0.9 GPH at 18 in spacing |
| Tubing | 1/2 in (0.634 in OD) |
| Pressure | Pressure-compensating, 15-50 psi |
| Best for | Raised beds, vegetable rows, hedgerows |