Best Anchors for TV Mounts & Heavy Items (2026)
By The DIYPicks Team · Updated July 2026
DIYPicks is reader-supported. As an Amazon Associate and affiliate of home-improvement retailers, we may earn a commission when you buy through links on our site — at no extra cost to you. This never affects our recommendations.
Heavy mounts fail at the anchor, not the screw, so this list is all about maximum honest holding power. We separated drywall picks from concrete picks because the base material decides everything. When possible, hit studs first and use these anchors only to fill the gaps.
The strongest, most reliable drywall anchor for heavy mounts, but overkill and pricey for light picture frames.
- Heavy loads
- Drywall
- Tv mount
Pros
- Highest holding power of any hollow-wall anchor tested, easily handles heavy TV mounts
- Metal straps snap flush so the bolt can be removed and re-installed without losing the toggle behind the wall
- Only needs a 1/2 in hole and a screwdriver or drill, no need to fish a spring toggle through
Cons
- The 1/2 in hole is large and hard to patch cleanly if you reposition
- Real-world safe load is a fraction of the 265 lb ultimate rating, so derate for repeated pull
- Costs several times more per anchor than plastic or self-drilling types
A fast, foolproof no-drill anchor for medium household loads on drywall, but not a substitute for a toggle on truly heavy items.
- Medium loads
- Drywall
- No drill
Pros
- No pre-drilling, one-piece design threads straight into drywall with a Phillips bit
- Nothing falls behind the wall during install, unlike loose spring toggles
- Rated for ceilings, which many plastic anchors are not
Cons
- 100 lb rating is a pull-out maximum, not a working load, so it is not for a heavy TV
- Only works in drywall, useless in wood, plaster over lath, or masonry
- Once driven and removed it strips the hole, leaving a larger patch than a small anchor
The go-to structural anchor for solid concrete, but permanent and wrong for hollow or brittle masonry.
- Concrete
- Heavy loads
- Structural
Pros
- Highest holding strength here for solid concrete, code-listed for structural use
- Simple install, drill, hammer in, tighten the nut and the sleeve expands to lock
- Zinc-plated steel stud handles high shear as well as tension loads
Cons
- Permanent, once expanded it cannot be backed out and reused
- Only for solid concrete, it will crack or fail to hold in brick, block, or mortar
- Requires a hammer drill and correct embedment depth and edge spacing to reach rated capacity
Still deciding? Compare them
Frequently Asked Questions
- Can drywall anchors alone hold a large TV?
- For a large TV, mount into studs whenever possible. If you must use hollow-wall anchors, use heavy metal toggles rated well above the total load, spread across all mount holes, and never rely on a single anchor.
- What anchor holds a TV mount on a concrete wall?
- A 3/8 in wedge anchor in solid concrete, or a sleeve anchor in brick or block. Both far exceed drywall anchors in strength when the hole is drilled to the correct depth and diameter.